E-Inspection Demonstration to FMCSA and FHWA Officials Offers Opportunity for Next Generation Alternative Compliance Program

WEST FRIENDSHIP, Md., June 17, 2013 – Two commercial trucks and a commercial motorcoach bus equipped with new mobile safety compliance technology are demonstrating, for the first time, a significant step in improving highway safety.

In a drive-by demonstration at the West Friendship Weigh Station and Inspection Site in Maryland, industry stakeholders and Federal Motor Carrier Safety Administration (FMCSA) and Federal Highway Administration (FHWA) government officials are observing trucks and buses electronically communicating with weigh station systems as they approach the facility, without ever having to slow down. Critical safety data on both vehicle and driver, including driver ID, electronic logging information, and the weight of the vehicle, are being communicated in real-time while the vehicle remains in motion – representing the first commercial application of its kind in the world.

“It’s next-generation technology, delivered today,” said Brian Heath, president of Burlingame, California-based Drivewyze, Inc. “An ‘e-Inspection,’ as we call it, is the first commercial vehicle-to-infrastructure (V2I) solution for large trucks and buses to leverage GPS and telematics technologies to augment traditional roadside safety inspections. Along with our in-truck technology partners PeopleNet, XRS and Zonar, we are proud to be supporting Maryland State Police and the trucking industry in demonstrating an innovative and cost-effective program to improve highway safety and efficiency.”

According to Captain Norman Dofflemyer, commander of the Maryland State Police Commercial Vehicle Enforcement Division, state weigh and inspection sites are the front line in reviewing a carrier and driver’s safety profile through Compliance, Safety, Accountability (CSA) scores. “If the carrier or driver has a solid safety record, and is not overweight (scales are at station sites), we can wave them through at the inspection site,” he said. “If we see a borderline case, or poor CSA score, we may inspect driver information and logbooks, plus do a vehicle inspection.”

Dofflemyer said the problem in the industry is there are too many trucks and not enough manpower for inspections. “With all of the vehicles coming into the weigh station – and we see some intrastate delivery trucks three or four times per day – systems and inspections can get clogged. There is a better way to do this.”

“That’s where bypass comes in, and in part, what we’re demonstrating today,” said Heath. “Drivewyze, as it’s used today, is a transparent, neutral platform that allows state agencies to reward safe truck and bus companies (as indicated by CSA scores), with bypass opportunities. This frees front line inspection officers to focus their attention on the trucks and buses that need inspections. A secure interface inside the weigh station displays the results of each bypass request after it has been automatically processed. Based on carrier, vehicle and driver-level data, and a state’s bypass criteria, trucks are told to either bypass or report to the weigh station. Aside from a 2 percent random inspection, most fleets with high safety scores can enjoy bypass rates of up to 98 percent.”

“It’s what we’re utilizing here in Maryland,” added Dofflemyer. “We implemented the Drivewyze bypass system last September and it is allowing us to see critical information on that vehicle in real-time, then bypass the safe owner-operators and fleets, and concentrate our efforts on the vehicles and drivers that should be inspected. Our only wish is that more trucks were equipped with the bypass system. Of our 15 state patrol-operated weigh and inspection stations, all are equipped to utilize Drivewyze. There was no cost to us since the system uses GPS and is cloud-based. We simply utilize the computer monitors already at the stations.”

The future, as demonstrated today, is what has Dofflemyer excited. The capability of transmitting additional Commercial Driver’s License (CDL) and Hours of Service (HOS) compliance information, plus weigh in motion, is now a reality and it has been developed at no cost to the government.

“If you look at industry statistics when it comes to accidents and fatalities, a driver issue is more often the cause, versus an equipment failure,” he said. “When we do inspections, we normally have to pull five to seven percent of the drivers off the road for logbook violations. Data on drivers is a crucial element to law enforcement.”

Showcasing the future at the demonstration were J.B. Hunt, Allied Trucking, and the motor coach company DATTCO Inc. “We’ve talked with many fleets throughout the country and there is support for what we are displaying,” said Heath. “Drivewyze bypass services already offer carriers the opportunity to save time, fuel and money. The system also now supports incentivizing carriers to provide additional CDL and HOS information. This lets responsible fleets leverage their investments in fleet management and safety systems to minimize delays while on the road.”
According to Heath, the vision is to offer truck and bus companies more than bypass service alone. “The trucking industry is very motivated to have these advanced real-time driver and vehicle safety screening events count as an electronic inspection (e-Inspection) in their safety profile,” said Heath. “The hope would be that e-Inspections could be accepted by FMCSA as a new type of inspection that would count as a credit in a carrier’s CSA safety score. This reward would strongly incentivize carriers to participate in the program. The more FMCSA rewards carriers for investments in this technology, the more information the industry will be willing to share in exchange. But, again, it’s voluntary. Today, carriers need only share basic carrier and vehicle information to participate in the program.”

Another piece of the puzzle is the wireless integration of weigh-in-motion technology. “FHWA has invested millions of dollars in imbedded scales near weigh stations and throughout the country at thousands of transportation planning sites,” said Heath. “Our technology captures the weight of a vehicle and adds it to the vehicle profile for use at the next inspection station, which may be many miles from the sensors itself. This eliminates the need to install weigh-in-motion systems at each enforcement site and adds the entire network of federal and state weighing systems as a potential source for the Drivewyze bypass program.

“This technology eco-system, being shown today, has been developed on commercial platforms,” Heath added. “Private industry, in partnership with 19 state agencies and the trucking industry together are championing the current mobile-based bypass program – the largest V2I deployment in history, at no cost to tax payers. The added capabilities of this system demonstrated today provide a vision for the future direction of safety and compliance in our industry. We look forward to finding new ways to work with FHWA and FMCSA in a common mission to make safer, more efficient highways.

About Drivewyze
Drivewyze Inc. is an innovative technology service provider to the transportation industry. Drivewyze is committed to improving road safety and efficiency for everyone. Drivewyze was founded in 2010 as a subsidiary of Intelligent Imaging Systems Inc., a provider of industry-leading road safety equipment and software services. Partnering with industry and government stakeholders to deliver time-saving and cost-effective driving solutions to commercial vehicle operators and carriers, Drivewyze provides unsurpassed business value to the trucking industry. For more information, visit www.drivewyze.com or call 1-888-988-1590.